Used Hyundai i30N Near Uelzen, Germany – Chromass Second Thought

Posted on

Used Hyundai i30N Near Uelzen, Germany – Chromass Second Thought

Hyundai has taken the wraps from the i30 N Undertaking C for the 2019 Frankfurt Motor Present. According to Hyundai, the i30 N Project C is ‘a lighter, lessen, more aggressive version’ in the i30 N Functionality. Only 600 models of your hot hatch is going to be designed, and it’ll be marketed solely while in the European markets.


Used Hyundai i30N Near Uelzen, Germany – Chromass Second Thought

Hyundai statements the ‘C’ inside the title means ‘carbon fibre’, ‘centre of gravity’ as well as the ‘Area C’ in the Namyang R&D high-performance test circuit. Besides, the major difference between the i30 N and Challenge C is its weight. The car is 50kg lighter than the i30 N, which is largely because in the 19-inch OZ Racing alloy wheels that save 22kg. Other weight-saving measures include certain carbon-fibre-reinforced plastic bits like a new front splitter, bonnet, rear diffuser and N-branded side skirts. Then there are the front bucket seats with carbon-fibre-reinforced plastic backings.

Powering the Hyundai i30 N Venture C is a 2.0-litre turbocharged, direct-injection petrol motor that pumps out 271bhp and 353 Nm of torque, and up to 378 Nm with over-boost enabled.

Inside, the i30 N Job C features ‘Deep Orange’ accents to distinguish itself from the standard model. Then there are the orange-finished dedicated Drive Mode and N-mode thumb paddles on the steering wheel, and a limited-edition badge on the dashboard that marks the number of each in the 600 cars.

This year’s Frankfurt Motor Display will host a limited edition version of Hyundai’s i30 N scorching hatchback, dubbed the Task C. The car boasts the same 271 HP (275 PS) engine as the regular i30 N, yet adds several design upgrades and dynamic touches.

Until now, we’ve only seen the Undertaking C underneath camouflaged foil, but this video shows the car in great detail, as we can clearly see all the lightweight carbon fiber bits, as well as the slightly upgraded interior.

Used Hyundai i30N Near Uelzen, Germany - Chromass Second Thought

Used Hyundai i30N Near Uelzen, Germany – Chromass Second Thought

Among the i30 N Job C’s carbon fiber elements we count the front chin spoiler, the hood, roof spoiler, side skirts and rear diffuser. Meanwhile, the motorsport-inspired 19-inch wheels also contribute to this limited edition scorching hatch weighing less than its mass-production counterpart.

The interior comes with an Alcantara-wrapped steering wheel with red buttons for the drive modes, red seat belts and red stitching for the part-Alcantara seats, which also feature a red stripe running down the middle. The gear knob has also been changed and is now fully metallic.

Performance will reportedly remain the same as inside the regular i30 N, meaning the car’s 2.0-liter turbocharged four-cylinder unit will continue to produce 271 HP (275 PS) and 260 lb-ft (353 Nm) of torque.

As for where the identify Task C comes from, that would be Hyundai’s high-performance facility at its Namyang R&D center in Korea, which features a development track dubbed ‘Area C’.

The Hyundai i30 N Venture C is going to be strictly limited to 600 units, available only in select marketplaces across Europe.

There really is no stopping the new hatch arms race at present. An output of 250bhp used to be impressive until 300bhp became the norm – and now the Mercedes-AMG A45 S’s 415bhp has left us wondering what’s next. It’s in this climate of oneupmanship that Hyundai has just revealed the Job C i30 N, an even spicier version of its i30 N fizz-machine.

The Venture C gets its name from the brand’s high-performance vehicle testing and development Area C track in Korea. With that in mind, Hyundai is describing the Project C as a ‘lighter, reduce, corner-slicing’ version with the Overall performance trim i30 N, so expect the same power with better driving dynamics and looks.

A press release – which also features the car in testing camouflage – says the Challenge C will use carbonfibre-reinforced plastic along with 19-inch wheels and dedicated aerodynamic touches. Unfortunately, it seems as though the N Option’s vented bonnet and rear wing – arguably the two best bits – have not built the cut.

Ever worry your Hyundai i30 N sizzling hatchback isn’t quite sizzling enough? Well, this N Option styling kit unveiled for the 2018 Paris motor exhibit could be just the ticket, lending a degree much more visual menace to Korea’s feted pocket rocket.

Used Hyundai i30N Near Uelzen, Germany - Chromass Second Thought

Used Hyundai i30N Near Uelzen, Germany – Chromass Second Thought

The Hyundai i30 N Option is a concept car for now, in accordance to the manufacturer, presenting a well developed look at what a racier version could look like. It was unveiled alongside the far more elegant go-faster i30 Fastback N, also making its world premiere within the Mondial de l’Auto.

Hyundai says there are 25 different upgrades made to the display car, both inside and out. It’s clear now that this was a testbed for the new limited edition Project C road car.

Some are easy to pick out – witness the Boeing-spec carbonfibre rear wing and vented composite bonnet – whereas others are mechanical tweaks or more subtle interior changes.

Buyers will soon be able to spec 20-inch cast alloy wheels with track-ready semi-slick Cup tyres for extra grip in corners. Handy for track days. Note also the red character line picking out the grille on this concept car, whose exhaust is bolstered by four chunky pipes.

Alcantara interior trim, sports pedals and a stubbier gearlever (above) complete the visual makeover.

The personalisation scheme will launch ‘in the near future,’ says Hyundai. Count on the scheme going live inside the next few months, with the full programme showroom ready by summer 2019, CAR understands.

If your funds run deep enough, you’ll be able to go the full hog and order a car like the one pictured here, but the personalisation programme will also let you mix and match different styling elements to create your bespoke i30 N.

Just goes to exhibit that personalisation is the title on the game nowadays, as manufacturers offer punters ever pricier ways to upgrade their cars. The thing is, we reckon the i30 N is just about perfect straight out from the box

Faster, lighter Hyundai i30 N Job C teased
Limited-edition sizzling hatch sheds the kilos, gets lessen track-focused suspension and new downforce-boosting aero
A lighter, faster limited-edition Hyundai i30 N Project C incredibly hot hatch has been previewed ahead of its launch later this year.

First images from the camouflaged limited-edition hot hatch testing on the Nurburgring demonstrate how the i30 N Challenge C is going to be heavily influenced by the N Option concept shown for the 2018 Paris motor demonstrate.

Used Hyundai i30N Near Uelzen, Germany - Chromass Second Thought

Used Hyundai i30N Near Uelzen, Germany – Chromass Second Thought

Changes over the standard i30 N include a new front splitter, finned side skirts and lessen, a lot more track-focused suspension.

Crucially, other Undertaking C additions include carbon-fibre body panels and a set of ultra-lightweight 19-inch alloy wheels that slash weight in a bid to boost efficiency.

How much weight is going to be shed hasn’t been announced, but in standard trim the i30 N tips the scales at a portly 1429kg.

There are no interior pictures, but the i30 N Task C is said to come with a pair of Alcantara-trimmed sport seats and liberal use of carbon-fibre for the vents, door-handles, dash, steering wheel and gear shifter.

Under the bonnet the i30 N Performance’s 2.0-litre turbocharged four-cylinder carries over unchanged. That means it produces the same 202kW and 353Nm of torque.

Hyundai hasn’t announced how much quicker the Undertaking C is compared to the 6.1 seconds it takes for the regular car to hit 100km/h, but with less weight to haul it should improve on that.

Hyundai has announced it plans to limit production with the i30 N Challenge C special-edition to just 600 cars for selected marketplaces in Europe by the end of this year, when it’s expected to command a large price premium over the i30 N General performance it’s based on.

However, given there’s no mention on the UK and therefore right-hand drive production, it’s unclear whether the faster i30 N will come to Australia.

That said, Hyundai Australia says it remains keen to offer some with the extras previewed by last year’s i30 N Option concept, including a carbon rear wing, carbon bonnet with air vents, quad mufflers, lightweight 20-inch rims with semi-slick tyres, matte paintwork, sports pedals, carbon interior components and an Alcantara-clad upper dash, sports bucket seats and steering wheel.

The Hyundai i30 N Task C is set to be unveiled on the Frankfurt motor demonstrate this September alongside the redesigned i10 city-car and a new concept for a pure-electric car.

Hyundai has been upping its game when it comes to sporty offerings. Last year, it launched a new Veloster, complete with an N functionality version “thoroughly honed” within the Nürburgring and powered by a 2.5-liter turbocharged engine. This time around, the Korean carmaker is preparing to drop the Hyundai i30N Venture C, a lightweight, track-focused, ’Ring-developed version of its already reasonably light, track-focused, ’Ring-developed warm hatch.

While information is fairly scant-the camouflage should tell you this isn’t quite a finished car-it’s fair to view this as Hyundai’s equivalent to something like a VW Golf GTI Clubsport. It’s the regular, already-boisterous i30N with harder-cored components as well as the skimming of weight (and therefore lap times).

“The unique specification includes carbon-fiber-reinforced plastic materials and motorsport-inspired 19-inch wheels,” says Hyundai, “making the i30N Venture C notably lighter than the standard i30N and far more responsive than ever to driver input.” It also cites “dedicated aerodynamic touches” and lessen ride height as contributing factors to an even sharper driving experience than standard.

The Project C appears to keep the regular i30N Performance’s 271hp 2.0-liter turbo engine, but with a likely weight of around 1.3 tons, we suspect its 0-100kph time to begin with a five and-with the help of that new aero-its 250kph top speed to climb. More stats as we have them.

If you’re wondering about the name, it refers to the slightly eerie-sounding ‘Area C,’ the track within Hyundai’s Namyang proving ground where the car spent a good chunk of its development.

Hyundai is making 600 units from the i30N Venture C, all of them for left-hand-drive markets in Europe. We’ll see it in all its orangey goodness-without disguise-at the Frankfurt motor display in September.

Hyundai has revealed the i30 N Task C at the IAA clearly show in Frankfurt. The Job C is a much more extreme version of your top 275 PS spec i30 N incredibly hot hatch. Available only to European customers, the lighter, reduced and much more aggressive Task C is limited to 600 units.

The ‘C’ within the identify means three things: the ‘Area C’ high effectiveness test circuit at Hyundai Namyang R&D centre (the birthplace of N), the use of carbon fibre (a Hyundai first), and the lowered centre of gravity. To that, this hardcore i30 N is 50 kg lighter than the standard car, and its CoG is 8.8 mm reduced.

The Undertaking C comes with clearly visible carbon-fibre reinforced plastic (CFRP) body parts lacquered smooth to exhibit the CF weave. The front splitter, rear diffuser, bonnet and N-branded side sills are all created from CFRP. Despite featuring a larger frontal area and lessen ground clearance (it sits six mm closer to the road), the Task C’s drag coefficient remains unaffected at 0.32. Dedicated aero touches help.

Here’s where the 50 kg savings come from. The forged 19-inch OZ wheels alone account for 22 kg of shed weight, with the bonus of it being unsprung. Elsewhere, the CFRP bonnet (-7.2 kg), both side sills (-499g each), front splitter (+240g of aero function and good looks), new design integrated rear diffuser (-386g) plus the manually operated Sabelt competition front bucket seats with CFRP backs (-7.5 kg each) do their part.

Used Hyundai i30N Near Uelzen, Germany - Chromass Second Thought

Used Hyundai i30N Near Uelzen, Germany – Chromass Second Thought

The lessen ride height and reduced CoG is from new calibrations for the existing i30 N dampers and shorter springs. The rear wheel hangers – or knuckles – on the hubs together remove 4.66 kg as here they are made from aluminium and not steel. There’s a stiff bar while in the boot, as per the i30 N’s Performance Package.

Meanwhile, all driving modes have been specifically calibrated for the Undertaking C – both Sport and N drive modes provide greater direct feedback, while N mode has been tuned for the “required agility and predictability while on race-track quality tarmac from the hands of much more experienced drivers.”

The Undertaking C’s interior features Alcantara highlights around the steering wheel, handbrake and gear lever boot. And just look at that brushed aluminium billet manual shift knob that’s shaped like a pistonhead. Deep Orange is the accenting colour found on the seat belts, stitching and stripes for the seats, and also the drive mode and N-mode buttons on the steering wheel. A numbered limited edition badge on the passenger side wraps things up.

The new i30 N’s exterior is dominated by dark matte grey along with the high gloss weave in the CFRP parts. The brake calipers stand out in Deep Orange.

Previewed at KLIMS 2018, the Hyundai i30 N is powered by a 2.0 litre Theta T-GDI engine, which in standard tune offers 250 PS and 353 Nm from 1,450 to 4,000 rpm. With the Functionality Package, output is bumped up to 275 PS. Paired with a six-speed manual gearbox, 0-100 km/h takes 6.1 seconds and top speed is 250 km/h.