Cheap Hyundai i30N Near Wonthaggi, Australia – Chromass Another Look

Posted on

[permalink]Cheap Hyundai i30N Near Wonthaggi, Australia – Chromass Another Look[/permalink]

Hyundai has taken the wraps from the i30 N Project C at the 2019 Frankfurt Motor Exhibit. According to Hyundai, the i30 N Job C is ‘a lighter, reduced, a lot more intense version’ in the i30 N Functionality. Only 600 units with the very hot hatch will be made, and it’ll be sold exclusively within the European markets.


[permalink]Cheap Hyundai i30N Near Wonthaggi, Australia – Chromass Another Look[/permalink]

Hyundai promises the ‘C’ within the name means ‘carbon fibre’, ‘centre of gravity’ along with the ‘Area C’ for the Namyang R&D high-performance test circuit. Besides, the major difference between the i30 N and Task C is its weight. The car is 50kg lighter than the i30 N, which is largely because from the 19-inch OZ Racing alloy wheels that save 22kg. Other weight-saving measures include certain carbon-fibre-reinforced plastic bits like a new front splitter, bonnet, rear diffuser and N-branded side skirts. Then there are the front bucket seats with carbon-fibre-reinforced plastic backings.

Powering the Hyundai i30 N Challenge C is a 2.0-litre turbocharged, direct-injection petrol motor that pumps out 271bhp and 353 Nm of torque, and up to 378 Nm with over-boost enabled.

Inside, the i30 N Job C features ‘Deep Orange’ accents to distinguish itself from the standard model. Then there are the orange-finished dedicated Drive Mode and N-mode thumb paddles on the steering wheel, and a limited-edition badge on the dashboard that marks the number of each of the 600 cars.

This year’s Frankfurt Motor Display will host a limited edition version of Hyundai’s i30 N incredibly hot hatchback, dubbed the Venture C. The car boasts the same 271 HP (275 PS) engine as the regular i30 N, yet adds several design upgrades and dynamic touches.

Until now, we’ve only seen the Project C underneath camouflaged foil, but this video shows the car in great detail, as we can clearly see all the lightweight carbon fiber bits, as well as the slightly upgraded interior.

Cheap Hyundai i30N Near Wonthaggi, Australia - Chromass Another Look

[permalink]Cheap Hyundai i30N Near Wonthaggi, Australia – Chromass Another Look[/permalink]

Among the i30 N Job C’s carbon fiber elements we count the front chin spoiler, the hood, roof spoiler, side skirts and rear diffuser. Meanwhile, the motorsport-inspired 19-inch wheels also contribute to this limited edition incredibly hot hatch weighing less than its mass-production counterpart.

The interior comes with an Alcantara-wrapped steering wheel with red buttons for the drive modes, red seat belts and red stitching for the part-Alcantara seats, which also feature a red stripe running down the middle. The gear knob has also been changed and is now fully metallic.

Functionality will reportedly remain the same as in the regular i30 N, meaning the car’s 2.0-liter turbocharged four-cylinder unit will continue to produce 271 HP (275 PS) and 260 lb-ft (353 Nm) of torque.

As for where the identify Task C comes from, that would be Hyundai’s high-performance facility at its Namyang R&D center in Korea, which features a development track dubbed ‘Area C’.

The Hyundai i30 N Project C will likely be strictly limited to 600 units, available only in select marketplaces across Europe.

There really is no stopping the new hatch arms race at present. An output of 250bhp used to be impressive until 300bhp became the norm – and now the Mercedes-AMG A45 S’s 415bhp has left us wondering what’s next. It’s in this climate of oneupmanship that Hyundai has just revealed the Task C i30 N, an even spicier version of its i30 N fizz-machine.

The Undertaking C gets its identify from the brand’s high-performance vehicle testing and development Area C track in Korea. With that in mind, Hyundai is describing the Venture C as a ‘lighter, decrease, corner-slicing’ version in the Overall performance trim i30 N, so expect the same power with better driving dynamics and looks.

A press release – which also features the car in testing camouflage – says the Challenge C will use carbonfibre-reinforced plastic along with 19-inch wheels and dedicated aerodynamic touches. Unfortunately, it seems as though the N Option’s vented bonnet and rear wing – arguably the two best bits – have not created the cut.

Ever worry your Hyundai i30 N incredibly hot hatchback isn’t quite sizzling enough? Well, this N Option styling kit unveiled within the 2018 Paris motor show could be just the ticket, lending a degree more visual menace to Korea’s feted pocket rocket.

Cheap Hyundai i30N Near Wonthaggi, Australia - Chromass Another Look

[permalink]Cheap Hyundai i30N Near Wonthaggi, Australia – Chromass Another Look[/permalink]

The Hyundai i30 N Option is a concept car for now, in accordance to the manufacturer, presenting a well developed look at what a racier version could look like. It was unveiled alongside the more elegant go-faster i30 Fastback N, also making its world premiere with the Mondial de l’Auto.

Hyundai says there are 25 different upgrades built to the present car, both inside and out. It’s clear now that this was a testbed for the new limited edition Challenge C road car.

Some are easy to pick out – witness the Boeing-spec carbonfibre rear wing and vented composite bonnet – whereas others are mechanical tweaks or far more subtle interior changes.

Buyers will soon be able to spec 20-inch cast alloy wheels with track-ready semi-slick Cup tyres for extra grip in corners. Handy for track days. Note also the red character line picking out the grille on this concept car, whose exhaust is bolstered by four chunky pipes.

Alcantara interior trim, sports pedals and a stubbier gearlever (above) complete the visual makeover.

The personalisation scheme will launch ‘in the near future,’ says Hyundai. Count on the scheme going live in the next few months, with the full programme showroom ready by summer 2019, CAR understands.

If your funds run deep enough, you’ll be able to go the full hog and order a car like the one pictured here, but the personalisation programme will also let you mix and match different styling elements to create your bespoke i30 N.

Just goes to present that personalisation is the name with the game nowadays, as manufacturers offer punters ever pricier ways to upgrade their cars. The thing is, we reckon the i30 N is just about perfect straight out from the box

Faster, lighter Hyundai i30 N Task C teased
Limited-edition sizzling hatch sheds the kilos, gets reduce track-focused suspension and new downforce-boosting aero
A lighter, faster limited-edition Hyundai i30 N Venture C very hot hatch has been previewed ahead of its launch later this year.

First images from the camouflaged limited-edition warm hatch testing on the Nurburgring present how the i30 N Job C will likely be heavily influenced by the N Option concept shown within the 2018 Paris motor show.

Cheap Hyundai i30N Near Wonthaggi, Australia - Chromass Another Look

[permalink]Cheap Hyundai i30N Near Wonthaggi, Australia – Chromass Another Look[/permalink]

Changes over the standard i30 N include a new front splitter, finned side skirts and reduce, a lot more track-focused suspension.

Crucially, other Venture C additions include carbon-fibre body panels and a set of ultra-lightweight 19-inch alloy wheels that slash weight in a bid to boost overall performance.

How much weight will probably be shed hasn’t been announced, but in standard trim the i30 N tips the scales at a portly 1429kg.

There are no interior pictures, but the i30 N Project C is said to come with a pair of Alcantara-trimmed sport seats and liberal use of carbon-fibre for the vents, door-handles, dash, steering wheel and gear shifter.

Under the bonnet the i30 N Performance’s 2.0-litre turbocharged four-cylinder carries over unchanged. That means it produces the same 202kW and 353Nm of torque.

Hyundai hasn’t announced how much quicker the Undertaking C is compared to the 6.1 seconds it takes for the regular car to hit 100km/h, but with less weight to haul it should improve on that.

Hyundai has announced it plans to limit production from the i30 N Project C special-edition to just 600 cars for selected markets in Europe by the end of this year, when it’s expected to command a large price premium over the i30 N Functionality it’s based on.

However, given there’s no mention of your UK and therefore right-hand drive production, it’s unclear whether the faster i30 N will come to Australia.

That said, Hyundai Australia says it remains keen to offer some of the extras previewed by last year’s i30 N Option concept, including a carbon rear wing, carbon bonnet with air vents, quad mufflers, lightweight 20-inch rims with semi-slick tyres, matte paintwork, sports pedals, carbon interior components and an Alcantara-clad upper dash, sports bucket seats and steering wheel.

The Hyundai i30 N Task C is set to be unveiled for the Frankfurt motor exhibit this September alongside the redesigned i10 city-car and a new concept for a pure-electric car.

Hyundai has been upping its game when it comes to sporty offerings. Last year, it launched a new Veloster, complete with an N effectiveness version “thoroughly honed” with the Nürburgring and powered by a 2.5-liter turbocharged engine. This time around, the Korean carmaker is preparing to drop the Hyundai i30N Undertaking C, a lightweight, track-focused, ’Ring-developed version of its already reasonably light, track-focused, ’Ring-developed very hot hatch.

While information is fairly scant-the camouflage should tell you this isn’t quite a finished car-it’s fair to view this as Hyundai’s equivalent to something like a VW Golf GTI Clubsport. It’s the regular, already-boisterous i30N with harder-cored components plus the skimming of weight (and therefore lap times).

“The unique specification includes carbon-fiber-reinforced plastic materials and motorsport-inspired 19-inch wheels,” says Hyundai, “making the i30N Job C notably lighter than the standard i30N and extra responsive than ever to driver input.” It also cites “dedicated aerodynamic touches” and lower ride height as contributing factors to an even sharper driving experience than standard.

The Undertaking C appears to keep the regular i30N Performance’s 271hp 2.0-liter turbo engine, but with a likely weight of around 1.3 tons, we suspect its 0-100kph time to begin with a five and-with the help of that new aero-its 250kph top speed to climb. Additional stats as we have them.

If you’re wondering about the identify, it refers to the slightly eerie-sounding ‘Area C,’ the track within Hyundai’s Namyang proving ground where the car spent a good chunk of its development.

Hyundai is making 600 units on the i30N Job C, all of them for left-hand-drive markets in Europe. We’ll see it in all its orangey goodness-without disguise-at the Frankfurt motor clearly show in September.

Hyundai has revealed the i30 N Challenge C within the IAA display in Frankfurt. The Job C is a extra extreme version of the top 275 PS spec i30 N very hot hatch. Available only to European customers, the lighter, decreased and much more intense Undertaking C is limited to 600 units.

The ‘C’ inside the identify means three things: the ‘Area C’ high overall performance test circuit at Hyundai Namyang R&D centre (the birthplace of N), the use of carbon fibre (a Hyundai first), and the lowered centre of gravity. To that, this hardcore i30 N is 50 kg lighter than the standard car, and its CoG is 8.8 mm reduced.

The Job C comes with clearly visible carbon-fibre reinforced plastic (CFRP) body parts lacquered smooth to display the CF weave. The front splitter, rear diffuser, bonnet and N-branded side sills are all built from CFRP. Despite featuring a larger frontal area and reduced ground clearance (it sits six mm closer to the road), the Undertaking C’s drag coefficient remains unaffected at 0.32. Dedicated aero touches help.

Here’s where the 50 kg savings come from. The forged 19-inch OZ wheels alone account for 22 kg of shed weight, with the bonus of it being unsprung. Elsewhere, the CFRP bonnet (-7.2 kg), both side sills (-499g each), front splitter (+240g of aero function and good looks), new design integrated rear diffuser (-386g) as well as the manually operated Sabelt competition front bucket seats with CFRP backs (-7.5 kg each) do their part.

Cheap Hyundai i30N Near Wonthaggi, Australia - Chromass Another Look

[permalink]Cheap Hyundai i30N Near Wonthaggi, Australia – Chromass Another Look[/permalink]

The lessen ride height and decrease CoG is from new calibrations for the existing i30 N dampers and shorter springs. The rear wheel hangers – or knuckles – on the hubs together remove 4.66 kg as here they are produced from aluminium and not steel. There’s a stiff bar within the boot, as per the i30 N’s Performance Package.

Meanwhile, all driving modes have been specifically calibrated for the Project C – both Sport and N drive modes provide greater direct feedback, while N mode has been tuned for the “required agility and predictability while on race-track quality tarmac inside the hands of additional experienced drivers.”

The Venture C’s interior features Alcantara highlights around the steering wheel, handbrake and gear lever boot. And just look at that brushed aluminium billet manual shift knob that’s shaped like a pistonhead. Deep Orange is the accenting colour found on the seat belts, stitching and stripes for the seats, as well as the drive mode and N-mode buttons on the steering wheel. A numbered limited edition badge on the passenger side wraps things up.

The hot i30 N’s exterior is dominated by dark matte grey along with the high gloss weave of your CFRP parts. The brake calipers stand out in Deep Orange.

Previewed at KLIMS 2018, the Hyundai i30 N is powered by a 2.0 litre Theta T-GDI engine, which in standard tune offers 250 PS and 353 Nm from 1,450 to 4,000 rpm. With the Functionality Package, output is bumped up to 275 PS. Paired with a six-speed manual gearbox, 0-100 km/h takes 6.1 seconds and top speed is 250 km/h.

Leave a Reply

Your email address will not be published. Required fields are marked *